end cam Cleats button -->

Buy Here

Buy right here from us, or from one of our distributors around the world.

Payment: Purchases are handled through the secure PayPal™ system.  Use any major credit card or a PayPal account. For credit cards, click the yellow “Check Out” button or "Don't have a PayPal account".
If you prefer to pay by check within the US, click here.

1 to 3 Day Shipping: Only $6 for one or two TillerClutch kits to anywhere in the US. After you click "add to cart", you can enter a zip code to see shipping costs.

International orders are welcomed. Click here to ship outside the US.

Models: We offer two TillerClutch™ models based on boat size. The standard TillerClutch is for stable trailerable boats, day sailors and pocket cruisers. The TillerClutchX is for heavier keel boats. There are various ways to route the control line based on cockpit size and layout and on personal preference.


TillerClutch Kit
includes a TillerClutch,
Control Line, Mounting Screws, Instructions & Warranty.
See kit choices on right.
(Optional cleats and fairleads sold separately)





Promo Code,if available:
(applies to one kit only)
Kit with Standard 12' (3.7m) Control line TC0001S $77.59
Kit with Long 16' (4.9m)
Control line TC0001L $78.79
TillerClutchX kit
for keel boats

TC0001X $87.89 TillerClutchX Button
Kit with Standard 12' Control line TC0001S $74.99
*15% Discount to apply
Kit with Long 16'
Control line TC0001L $76.19
*15% Discount to apply
TillerClutchX kit
for keel boats

TC0001X $84.95
*No Discount
TillerClutchX Button
Kit with Standard 12' Control line TC0001S $74.99
*10% Discount to apply
Kit with Long 16'
Control line TC0001L $76.19
*10% Discount to apply


TillerClutchX kit
for keel boats

TC0001X $84.95
*No Discount
TillerClutchX Button
OPTIONAL ACCESSORIES:
We recommend a pair of adjustment cleats (V cleats or cam cleats) to attach and adjust your control line at each end, port and starboard .


Mini Cam Cleat with fairlead (each)
These small Servo Cam Cleats sized for a 3/16” (5mm)
control line are unobtrusive. Easy to cleat, or remove line
with one hand. Includes one cam cleat, wire fairlead, and
screws as shown. Screw spacing 1-1/16” (27mm).
mounting instructions included.

TC009 $16.95


V-Cleats glass-filled nylon (pair)
These glass-reinforced nylon V cleats with
built-in fairlead areinexpensive, yet effective for this application. Sized for a 3/16 inch (5mm) line. Screw spacing 2-1/8" (55mm). Includes four 316 stainless screws.

TC003S $5.36


V-Cleats stainless steel (pair)
If you prefer stainless steel, these V cleats
are an effective choice.
Screw spacing is 2-13/16" (56mm)
Sized for a 3/16 inch (5mm) line
Includes four 316 stainless screws

TC008S $9.08


Eye Strap Fairleads (pair)
For routing the control line back to the transom
before turning it forward to V cleats or cam cleats mounted on the cockpit coamings. Made of solid stainless steel, they are smooth all around, small and unobtrusive. Screw spacing 1-9/16" (40mm). Includes four 316 stainless screws

TC005S $5.52


Replacement Control Line
High-quality 3/16 inch (5mm) double braid
with specially-prepared ends.

Standard 12 ft (3.7m) Control line TC0012 $3.60
Long 16 ft (4.9 m) Control line
TC0016 $4.80


Replacement mounting screws
for TillerClutch, 316 stainless steel
Pair of #8 (4.2mm) flat-head Phillips
screws 1-3/4” (45mm) long

TC0002 $0.95
Español and other languages

Send inquiries to: info@WaveFrontMarine.com
or write to: WaveFront, Inc., PO Box 1632, Pittsboro, NC 27312
Copyright 2010-2014 WaveFront, Inc.  All rights reserved.

howtobuy